TP-Link 802.3at/af Gigabit PoE Injector , Non-PoE to PoE Adapter, supplies up to 15.4W, LED Indicator,Plug & Play , Desktop/Wall-Mount ,Distance Up to 100m, Black (TL-PoE150S)

Product Information

A: PoE injectors are based upon the rules defined by the IEEE 802.3 standards. Normally, Ethernet cables like Cat5, Cat5e, Cat6, etc. are all available to connect between the injector and the PoE devices/network switches. For example, an access point requires a network connection and of course power. Now without Power over Ethernet, you will need to pull a network cable to the access point and connect the power adapter to it. Something you don’t have any room for most of the time.

PoE (Power over Ethernet) technology enables power and data to be delivered over twisted pair Ethernet cabling with the aid of some PoE devices like PoE switch, PoE injector & PoE splitter, etc. If your low-power devices need to be set up in locations where a power outlet is unavailable, PoE injectors are just there, offering access to install devices in hard-to-reach areas with a minimal impact on existing structures and budgets. Wanna get a deeper understanding of PoE injectors? This article will help you to figure out "What Is PoE Injector?", how to use Power over Ethernet injectors in applications, and solve your questions in the final FAQ part.A crucial aspect of PoE is how power is delivered via Ethernet cables. Passive PoE describes ethernet power supplies (like PoE switches or PoE injectors) that send raw unnegotiated energy down ethernet cables to connected devices. The device connected to that cable will receive the electricity, whether it is able to handle it or not. This is why Passive PoE is dubbed as “Always ON.” A typical PoE Switch Almost all PoE cables have eight Ethernet wires inside them. Instead of being organized in a parallel fashion, these eight wires are further divided into four twisted pairs. Among these four pairs, two are used for data transfer and the other two are spare. Twisted Pairs in an Ethernet Cable

Customers from different industries choose TP-Link, including hospitality, education, catering, retail, enterprise, transportation, accommodation, healthcare, public services, big events, and more. Hear about real usage scenarios, comments of partners and customers, and find new, imaginative ways of using TP-Link products. So long as you use the same pin out on both adapters it seems like the wire in the middle wouldn't matter all that much.

Standards

Plug the Ethernet cable into the PoE injector's Power or PoE port and into the IP camera's PoE port.

Plug another Ethernet cable to connect the injector's Ethernet or Data port and the Ethernet switch.After that, it matches it with the requirements of the gadget itself. If it senses any discrepancy in current flow, it simply won't flow the current to the gadget. This is a great safety measure as it can prevent fire and other hazards. How power is delivered over Ethernet In these two tips, pairs blue and blue/white and brown and brown/white are cut and left open. In no situation they should be connected DC power at the risk of damaging the Switch or Wireless Router, so make sure they are left opened!